Bus Topology – Advantages And Disadvantages of a Bus Topology

Bus-Topology

What is Bus Topology?


Bus Topology is a Network Topology, in which network nodes are arranged in a linear format, with each node connected directly to the one main network cable with a T-Connecter or tap. The main Network cable is also known as a Trunk, Segment, or Backbone. The main network cable segment must have a terminator installed at both ends of the Bus Topology. This will absorbs the signal when it reaches the end of the wire. If there is no terminator, the electrical signal bounces back at the end of the wire, which causing a collision in the network.

A Bus is a Passive Topology, the data signal passes by the node, not through the node. This means the nodes on the Bus are not responsible for regenerating the data signal.

Bus Topology-Ofbit.in

When a node or computer sends out a data signal, it travels the Trunk in both directions from the sender. When the data signal reaches the end of the trunk, it bounces back and returns in there direction it comes from. This is called Signal Bounce. At the time of Data Bounce, if another signal is sent on the trunk, two data signals will collide and be destroyed. To avoid this problem the solution is Terminator, installed at each end of the trunk. The function of the terminator is to absorb the data signal when it reaches the end and prevents the Data Bounce. If there is no Terminator or break in the trunk, because of the unterminated ends, the entire network will go down.

Advantages And Disadvantages of a Bus Topology


Bus Topology is also known as Line Topology, is very easy to set up and requires no additional hardware such as a hub or switch. So far we describe bus topology, now let’s look at the advantages And disadvantages of a Bus Topology.

Advantages of a Bus Topology


  1. Easy to setup. With a Bus network, simply connect the nodes in a linear format without affecting any other Node.
  2. Bus Network Uses Less cable than Star Topology and Mesh Topology.
  3. You do not need to purchase any additional devices, i.e. Switch or Hub.
  4. Overall Cost is less than other Network Topology, as less Cable and no Central device required.
  5. If a node fails, the network stays functional.

Disadvantages of a Bus Topology


  1. In case of a break in a trunk, the entire network goes down.
  2. If the entire Network goes down, troubleshooting will be very difficult.
  3. Bus Topology is not very Scalable and not suitable for large networks.

Follow us:


If you like our articles and tutorials, you can follow us on Facebook. Also, join our Official Facebook Group for QnA sessions and Discussions with the worldwide technical community.

Related posts

3 Thoughts to “Bus Topology – Advantages And Disadvantages of a Bus Topology”

  1. […] networking environments, Star topology is very popular and offers a lot of advantages over Bus Topology. One of the major benefits of Star topology over Bus topology is that a break in the cable causes […]

  2. […] Bus topology, Ring topology has no start or no end that needs to be terminated. The problem is, that the Ring […]

  3. […] Topology is Costly, if we compared it to other topologies, like Bus Topology, Star Topology, Ring Topology, etc. It is because of the additional cabling and network interface […]

Leave a Comment